Skip to content
Fort Union

NDIC daily activity report no. 19635

Friday, November 13, 2026

Friday's report 19635 approved four new permits, all from Phoenix Operating LLC: the John 29-20-17 2H through 5H wells on one McKenzie County pad in the Ranch Creek field. Petro-Hunt renewed two confidential Setterlund permits in Burke County and Lime Rock Resources renewed two older permits in Dunn County. Burlington Resources completed two more Omlid wells in McKenzie County, the better one at 1,072 barrels of oil a day, and Whiting Oil and Gas listed 12 more producers as abandoned. The rig count held at 33.

Highlights

  • 4 permits approved: Phoenix Operating LLC, John 29-20-17 5H, 4H, 3H and 2H (#43483 to #43486), NE NE 32-146N-98W, McKenzie County, Ranch Creek field, development wells, spacing unit of Sections 17, 20 and 29, Township 146 North, Range 98 West, location outside of the spacing unit
  • 4 permit renewals: Lime Rock Resources III-A, L.P., State 3-25-36H-144-97 L (#30058) and Kary 5-24-13H-144-97 L (#30059), Lot 1 of 30-144N-96W, Dunn County, Cabernet field. Petro-Hunt, L.L.C., Setterlund 159-94-33D-28-2H and 159-94-33D-28-3H (#42484, #42485), SW SE 33-159N-94W, Burke County, North Tioga field, confidential, proposed drill-back outside of the spacing unit
  • 2 producing wells completed: Burlington Resources Oil & Gas Company LP, Omlid 1-8-7 TFH (#42175), SE SW 7-151N-97W, McKenzie County, 833 barrels of oil and no water a day; Omlid 6-8-7 MBH (#42184), same quarter-quarter, 1,072 barrels of oil and 1,558 barrels of water a day
  • 12 producers now abandoned, all Whiting Oil and Gas Corporation: in Mountrail County, Fladeland 44-31H (#17641), Brehm 21-4H (#19320), Hukkanen 11-23H (#22563), Van Hook 44-4H (#24857), Waldock Federal 14-4-3XH (#27231) and Bender 14-6H (#27310); in McKenzie County, Koala 15-31-30-2H (#21306) and Koala 4-4-28-3H3 (#27410); in Williams County, P State 154-97-3-16-21-14H (#23373), Kaldahl 34-12H (#23870) and Kaldahl 24-12H (#29338); and Gajewski 32-7 (#34466), NW NE 7-151N-101W

The active rig count was 33, unchanged from the prior report.

What it means for mineral owners: If you own in Sections 17, 20 or 29 of 146N-98W in McKenzie County, Phoenix Operating's four John permits are the news. All four sit on one spot in the northeast of the northeast of Section 32, just south of the unit, and all four point at the same three-section spacing unit. Four permits on one pad for one unit usually means the operator plans to develop it, though a permit still isn't a well. Renewals keep a permit alive. They don't tell you a rig is coming, but they do tell you the operator wants to keep the option open, which is worth knowing if you own around the Setterlund pad in 33-159N-94W in Burke County or the Lime Rock wells in 30-144N-96W in Dunn County. Burlington's Omlid pad in 7-151N-97W has now posted three completions in two days, counting the Omlid 7-8-7 MBH on Thursday's report, so owners in that unit have real daily rates to compare against their first statements. The Whiting list is longer than Thursday's: 12 older producers, most of them in Mountrail County. If you were still getting small checks from one of them, expect those to stop. The rig count stayed at 33.

Sources and further reading: NDIC daily activity report 19635 (PDF) · NDIC daily activity reports index · Find My Well search (DMR) · Current North Dakota rig list (DMR)

Read the official report (PDF)

We summarized this from the Commission's daily activity report. The entries shown are a selection, not the full list, and the official PDF is the one that counts. See also all daily reports and the NDIC News RSS feed.